Concrete Mix Ratio: What Is It? What Is 1-2-3? …And More.

What Is Concrete Mix Ratio?

Handyman's World is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Whether you’ve used concrete on a job site or on a DIY project, you likely know that the toughest part of using the material is getting its consistency just right. Often, you need it “dry” enough to hold its form while curing, while still “wet” enough to be easily malleable. Trial and error on this front can be effective, but costly when it comes to the use of raw resources.

Alternatively, you could try utilizing one of the many, many tried and true concrete mix ratios out there today. Thousands of craftsmen have used these ratios before, making it easier to know their consistency and strength before mixing any ingredients together. These ratios also act as a recipe of sorts, allowing you to scale up your volume of concrete proportionally. One of those is the “classic” 1-2-3 concrete mix ratio.

This guide will highlight which of these common ratios are the best for certain uses based upon their strength and practicality. Using this information, you should easily be able to select the most suitable one for your next project.

What Is a Concrete Mix Ratio?

A concrete mix ratio is fairly straight forward when you get down to it.

In essence, this kind of ratio is a recipe for the amounts of basic concrete ingredients you need to add in order to achieve a certain quality of concrete. In other words, a concrete mix ratio allows you to reliably add the right amounts of powdered cement, aggregate, and sand when mixing the same type of concrete.

A concrete mix ratio is usually expressed by a set of numbers separated by colons, as is the case with a 1:2:3 ratio. This tells the mixer that they need to add 1 part cement powder, 2 parts sand, and 3 parts aggregate in order to create the desired concrete consistency.

Water is not included in these ratios, though, because it can vary more based upon your project’s needs.

What is the 1-2-3 Concrete Mix Ratio?

The 1-2-3 concrete mix ratio is considered the “classic” mix ratio by many professional builders. That is because it is among the most versatile mix ratios, regardless of what scale it is being used at. As such, it can productively be used in a wide variety of weight-bearing projects.

The 1-2-3 ratio’s make up is described right in its name. To that end, this ratio is made up of 1 part cement powder, 2 parts sand, and 3 parts washed aggregate.

Water can then be added at any desired volume to achieve the desired consistency.

The 1-2-3 Concrete Mix Ratio

What Mix Ratios to Use for Concrete of Varying Strength?

Another major reason craftsmen regularly use concrete mix ratios is to achieve a certain tensile strength from the resulting concrete. This quality can be difficult to judge in advance, so it is always worth their time to use a reliable recipe each and every time they need to make a fresh batch.

These are just a few of the most common concrete mix ratios used on job sites today. Keep in mind that a mixture’s precise psi rating can depend on its environment. As such, it is worth your time to consult with a concrete professional when you are planning a project that requires a precise amount of concrete strength.

3,000 psi Concrete Mix Ratio

Though it is on the lower end of the concrete strength scale, this mix ratio actually requires larger amounts of certain key ingredients. Specifically, this ratio calls for 1 part cement powder, 3 parts sand, and 3 parts aggregate. These can then be mixed with a minimal amount of water to achieve a workable, reliable slump.

4,000 psi Concrete Mix Ratio

Next up, this ratio requires slightly less of one ingredient compared to its predecessor.

This change alters the physical structure of the concrete as it sets, which in turn makes it even stronger when put under pressure. To make this mix, you’ll need to combine 1 part cement powder, 3 parts sand, and 2 parts washed aggregate.

5,000 psi Concrete Mix Ratio

When working to achieve a 5,000 psi or higher concrete mix, you should consult with a professional before commencing. This is especially true if your concrete will eventually be load-bearing in nature. This can ensure that the proper additives are included to maximize the mix’s strength.

In any case, this mix can be made by combining 1 part cement powder, 2 parts sand, and 1 part coarse aggregate. This will result in a mix that can likely support this much pressure reliably.

3,000 psi Concrete Mix Ratio

What Concrete Mix Ratio Should You Use for a Slab?

When it comes to mixing concrete for the purpose of creating a slab, you have a few options in front of you. In many circumstances, a basic 1:2:3 ratio will serve your project’s needs well. This is especially true if your slab is only going to be used as the basis for other construction down the line.

However, if your slab is going to be very large or is likely to endure a lot of weight over its lifespan, you may want to kick your concrete mix ratio up a notch. To do this, add slightly more aggregate so that you have a 1:2:4 ratio. With the right amount of water and additives added in, this should result in a reliable mix that is appropriate for slab creation.

What Concrete Mix Ratio Should You Use for Footings?

Properly setting a structure’s footings can be essential for its long-term stability. Also, footings are difficult to repour after they have dried, so it is essential to get the right mix ratio right on the first go-around.

In that case, you’ll want to mix 1 part cement powder, 2 parts sand, and 4 parts rough aggregate. This reliable mixture can be easily poured into a footing space (or a Sonotube) while still drying in an even, consistent manner. Be sure to use as little water as possible, though, to ensure the mix is able to properly dry while in the footing space.


So, in the end, concrete mix ratios are not all that complicated.

All they are is a simple recipe that can ensure that your concrete always comes out precisely as intended. These recipes are important to follow at all times in order to establish consistency from job to job as well as minimize waste relating to your raw materials.

Now that you know “classic” mix ratios like the 1-2-3 mix, you’ll be able to accomplish a wide number of jobs that require concrete without hesitation. Before continuing, though, you should also make sure you understand the differences between concrete, mortar, and other similar materials.