Makita 5007MG Review: A Circular Saw Worth Getting?

Handyman's World is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Makita 5007MG Review: A Circular Saw Worth Getting?

While there are many 7-1/4-inch circular saws on the market, only a few of them have a large cutting capacity while also sporting a fast no-load speed. The Makita 5007MG is a good example of this rare find, and that’s why I’m going to review this power tool just for you.

If you are eyeing on this circular saw from Makita, read on below to find out about its specs, features, pros, and cons, so you can decide for yourself whether to buy or pass.


Reviewed Product

Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw

A heavy-duty circular saw that’s durable enough to use on tough materials and for long hours on jobsites. This tool is sturdy and durable, featuring and LED guide light and dust blower as well.


This circular saw boasts a larger cutting capacity above most others in its class. This is important if you want to get more work done or if you are working with large materials. The high speed of the tool can also help with productivity.


With a 15-amp motor and a speed of 5,800 RPM, this circular saw is built for bigger tasks with its larger maximum cutting capacity of 2-1/2 inches at 90 degrees. Powered at 2,300 watts, it has bevel stops at 22.5 and 45 degrees while having a bevel capacity of up to 56 degrees.

The weight of the tool is 10.6 pounds, which is a given since it has a higher speed and a bigger cutting depth than most units of its kind.


Makita backs up their circular saw with a 1-year warranty for defects from workmanship and materials. They also offer a 30-day satisfaction guarantee.

Nonetheless, to ensure durability, the circular saw shoe is made with magnesium for long-term use and stability on the job-site. The gears of this circular saw are also heat-treated to withstand years of abuse.

It even has a dust blower onboard so you will find it easy to clear out unwanted debris (and protect the motor). What’s more, if you tend to fall prey to power cord pull-outs, no need to worry about that due to the reinforced cord design.


The cutting power and conveniences of the tool, such as the readable ruler markings on the base, makes it ideal for simple tasks such as lumber work and even for particleboard and bevel cutting. If you have the necessary blade, it can even be used for masonry and metals.

What I like are the large rubberized levers, which allows you to tweak the tool’s position even with just one hand, so you can focus on keeping your material steady. In addition, its LED lights help with viewing the cut line, to add more to its accuracy features.

Conveniently, you will be able to change blades quickly using the onboard blade wrench attached to the saw. It’s also helpful that there’s a clearance between the blade case and the rear handle – perfect for working with gloves without feeling awkward.

Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw

Should You Buy the Makita 5007MG?

The Makita 5007MG will appeal to you if you are looking for a job-site workhorse and if you don’t mind the weight. Its magnesium components and heat-treated carbide-tipped blades scream durability while the large cutting depth can save time and increase productivity with large projects.

Aside from handling plywood, lumber, and particleboard, this tool is also applicable for masonry and metal cutting with the right cutting disc for the job. After all, blade change is a breeze due to the onboard blade wrench. The added reinforcement on the power cord is also helpful for keeping the unit safe from accidental cord pull-outs.

If you are still unsure about the decision, go through the below list of the pros and cons of the tool.

Pros of the Makita 5007MG

Let’s start with the pros.

It has jobsite-ready features.

The circular saw has a magnesium shoe for durability and a sturdy power cord to avoid pull-outs.

It has a large cutting depth.

With a cutting depth of 2-1/2 inches, it has a fairly big value compared to similar circular saws in the market (which are usually around 2-7/16 inches). By having a large cutting depth, you will be able to accomplish more tasks as compared to a smaller one.

The cutting speed is high.

At 5,800 RPM, a cutting speed like this improves productivity so you can get more materials cut faster. It goes hand-in-hand with its large cutting depth, after all.

Changing blades is convenient.

Due to the onboard blade wrench attached to the saw, swapping discs is not so difficult. This helps switch between finishing blades and coarse cutting blades faster.

Makita 5007Mg in Use

Cons of the Makita 5007MG

On the other hand, while it has good points, the product has some minor drawbacks.

The tool is on the heavy side.

Unfortunately, 10.6 pounds of weight doesn’t make the tool as portable or as comfortable to handle as other models. However, the added weight will help with its stability and durability.

The blade guard doesn’t retract properly.

The blade guard could be redesigned since cutting at angles is somewhat difficult with it. However, you can just work around this problem by retracting the blade even before you begin the cut.

What Are the Alternatives to the Makita 5007MG?

Makita 5007Mg Alternative: DeWalt DCS570B From the same manufacturer, the Makita 5007F circular saw (read my review) has roughly the same specs in terms of speed, LED light illumination (line of cut), lower guard design, motor amperage, and others. The difference, however, lies in the depth of cut, since this one has only up to 2-3/8 inches of cutting capacity at 90 degrees. Instead of magnesium parts, aluminum is used for the shoe material.

The Skil 5280-01, on the other hand, has a lower speed of 5,300 RPM but is also a 7-1/4-inch circular saw with a carbide-tipped blade. It even has a spindle lock to avoid hassle when changing discs plus a dust blower for debris management. You will like this one if you prefer a lighter weight for a circular saw since it is only 6.95 pounds.

If you prefer to go cordless, the DeWalt DCS570B is for you, which also has a 7-1/4-inch blade capacity but at a lower speed of 5,200 RPM. It has a slightly larger depth of cut at 2-9/16 inches (90 degrees) and has a bevel of 57 degrees. It also has an electric brake that instantly stops the wheel when you turn it off – perfect for saving time between cuts.

Finally, make sure to also check my list of the best circular saws for beginners.


As a whole, the Makita 5007MG is a heavy-duty workhorse for most job site tasks due to its high speed and large cutting depth. Although I understand that a 10.6-pound tool is a little too much compared to 9-pound or 8-pound circular saws, that’s not an issue if you want to look for durability in a circular saw.

Due to its convenient features, such as the LED guide light and dust blower, your work productivity won’t be compromised.

Before committing to this one, though, make sure to also check my comparison of the four most popular Makita 5007 Series circular saws including this one.


Reviewed Product

Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw

A heavy-duty circular saw that’s durable enough to use on tough materials and for long hours on jobsites. This tool is sturdy and durable, featuring and LED guide light and dust blower as well.